Views: 0 Author: Site Editor Publish Time: 2022-04-02 Origin: Site
In recent years, the appearance of automobiles has become more fashionable, the space has become larger, and the configuration is unusually rich, but the prices have gone down and down. Some are because of the technological nation of production lines, and the cost is falling; some are because manufacturers are fighting for market share to compete for market share. Others are to cater to consumers, working hard on configuration and space, but due to cost constraints, they can only "cut corners" in places that consumers can't see, such as canceling the stainless steel bull bar. But in fact, stainless steel bull bar is very important.
What is the existing value of stainless steel bull bars?
What are the preparation steps for replacing the car stainless steel bull bar?
What are the following steps of replacing the car stainless steel bull bar?
The front receives the impact force, and the stainless steel bull bar distributes the force to the energy-absorbing boxes on both sides and then transmits it to the left and right front side members, and then to other structures of the body. The rear is subjected to impact force, and the impact force is transmitted to the energy-absorbing boxes on both sides by the rear stainless steel bull bar, then to the left and right rear longitudinal beams, and then to other structures of the body. Low-strength impact stainless steel bull bars can cope with it, while high-strength impact stainless steel bull bars play the role of power transmission and dispersion and buffering, and finally transfer to other structures of the body, and then rely on the strength of the body structure to resist.
Start the car to turn the full wheel to the right first, then turn off the engine and remove the car key, then open the hood and disconnect the negative battery of the battery. Use a Phillips screwdriver to remove the four screws on the stainless steel bull bar. Use a 5mm Allen key to remove the two screws on the side of the stainless steel bull bar.
1. Use a small ratchet wrench, post, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and a 7mm socket to remove the screws connecting the fender and the bumper, and use a large ratchet wrench and a 10mm socket to remove the four bolts behind the headlight;
2. Remove the plug of the headlight assembly. Remove the headlight of stainless steel bull bar assembly. Remove the screws connecting the splash guard and the fender, and the fender can be removed;
3. The fender position is outside the body of the wheel. The function is to reduce the wind resistance coefficient according to fluid mechanics and make the car run more smoothly. According to the stainless steel bull bar installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel;
4. Because the stainless steel bull bar has a steering function, it is necessary to ensure the maximum limit space when the front wheel rotates. Therefore, the designer will use the "wheel bounce diagram" to verify the design size of the fender according to the selected tire model size.
Stainless steel bull bar has become an indispensable part of automobile production. Without it, the safety of the car will be greatly reduced. WEIBO is located in Foshan City Guangdong Province China was founded in2015. They have been a professional manufacturer specialized in designing, producing, and marketing automotive exterior decoration parts.